I have some tips :D
-Must set clocks when temperature is warmer then -150c then cool down right
before the benchmark to -180c
-Must warm card back up after benchmark to -150c before opening GPU-Z for
screenshot or it will fail.
-If the pot makes a "crack" noise during the benchmark and causes
failure, you must warm back up to -80c or so before you try higher clocks
again. The TIM no longer is sealed to the graphics core.
-All switches on the card set to ON position.
-Make sure you are using a good thermal paste, OCZ freeze, Formula-7, titan
nano etc...
Settings for clock speed 1550/1350
+449 vGPU (anything higher will cause failure (drops to 0.300v)
+200 vMem
+0 AUX
-180c during benchmark.
'Graphic' 카테고리의 다른 글
VTX HD7970 3DMark03 테스트 (0) | 2012.02.28 |
---|---|
MSI GTX580 Lightning SLI Test (3) | 2011.07.19 |
HD6970 라이트닝 오버클럭 테스트 (2) | 2011.04.06 |
MSI HD6970 라이트닝 (0) | 2011.03.20 |
ASUS GTX580 DirectCUII 프리뷰 (0) | 2011.03.20 |