E8600 5Ghz 인증샷

음 Q820A744 주차 동석님에게 구한 물건이다. 이넘의 MOA에서 받은 넘보다는 약간 좋은거 같지만 이넘도 거기서 거기인 것 같다. 웬지 FSB가 안올라가는 느낌인가? 아무튼 보드 문제인지 FSB620이상은 넘기기 힘든것 같다.
이전 E8500도 바이오스타에서는 645정도나 올라가주었는데 말이다.

아마 세팅 문제 아님 보드 문제 인듯.. 공랭으로 4.95 정도 돌아가고, 5기가 까지 인증했다는데 만족하자.

아마도 다른 하나는 RMA 행인듯 싶다.

인증 주소는 아래와 같음.

http://valid.x86-secret.com/show_oc.php?id=446744

해당 시스템 사진은 오랜만에 닌자와 함께 하였다.

랜파티에 대한 세팅 설정치

전압 세팅
vcore : +550mv ( 실인가 전압 1.6v)
vdimm : 2.1v
pll : 1.55v
vNB: 1.3575v
vtt : 1.4v
GTL : 0.61x, 0.61x, 0.58x

램 디바이더 : 400/800
skew : 200ps, 0ps
램 세팅 : 4-4-4-9-35-2T  mode3, mode3, mode1

좀더 상세한 세팅 정보에요.

>CPU Feature:

Thermal Management Control.......... - Disabled
PPM(EIST) Mode...................... - Disabled
Limit CPUID MaxVal.................. - Disabled
CIE Function........................ - Disabled
Execute Disable Bit................. - Disabled
Virtualization Technology........... - Disabled
Core Multi-Processing............... - Enabled

>DRAM Timing:

Enhance Data transmitting........... - Auto
Enhance Addressing.................. - Auto
T2 Dispatch......................... - Auto

>Clock Setting Fine Delay Press Enter:

DLL And RCOMP Settings.............. - Auto
Ch1 Dram Defaul Skew................ - Model 3
Ch2 Dram Defaul Skew................ - Model 3
RCOMP Settings...................... - Model 0

Fine Delay Step Degree.............. - 70ps
Ch1 Clock Crossing Setting.......... - Nominal
DIMM1 Clock Fine Delay.............. - Current[2396ps]
DIMM2 Clock Fine Delay.............. - Current[2396ps]
Ch1 Control0 Fine Delay............. - Current[268ps]
Ch1 Control1 Fine Delay............. - Current[268ps]
Ch1 Control2 Fine Delay............. - Current[268ps]
Ch1 Control3 Fine Delay............. - Current[268ps]
Ch1 Command Fine Delay.............. - Current[394ps]

Ch2 Clock Crossing Setting.......... - Nominal
DIMM3 Clock Fine Delay.............. - Current[2066ps]
DIMM4 Clock Fine Delay.............. - Current[2066ps]
Ch2 Control0 Fine Delay............. - Current[48ps]
Ch2 Control1 Fine Delay............. - Current[48ps]
Ch2 Control2 Fine Delay............. - Current[48ps]
Ch2 Control3 Fine Delay............. - Current[48ps]
Ch2 Command Fine Delay.............. - Current[394ps]

Ch1 Ch2 Common Clock Setting........ - Nominal

Ch1 RDCAS GNT-Chip Delay............ - Auto
Ch1 WRCAS GNT-Chip Delay............ - Auto
Ch1 Command To CS Delay............. - Auto
.
Ch2 RDCAS GNT-Chip Delay............ - Auto
Ch2 WRCAS GNT-Chip Delay............ - Auto
Ch2 Command To CS Delay............. - Auto

Flex Memory Mode..................... - Auto
CAS Latency Time (tCL)............... - 5
RAS# to CAS# Delay (tRCD)............ - 5
RAS# Precharge (tRP)................. - 5
Precharge Delay (tRAS)............... - 9
All Precharge to Act................. - Auto
REF to ACT Delay (tRFC).............. - 35
Performance Level.................... - 10

>Read delay phase adjust Press Enter:

Channel 1 Phase 0 Pull-In........... - Auto
Channel 1 Phase 1 Pull-In........... - Auto
Channel 1 Phase 2 Pull-In........... - Auto
Channel 1 Phase 3 Pull-In........... - Auto
Channel 1 Phase 4 Pull-In........... - Auto

Channel 2 Phase 0 Pull-In........... - Auto
Channel 2 Phase 1 Pull-In........... - Auto
Channel 2 Phase 2 Pull-In........... - Auto
Channel 2 Phase 3 Pull-In........... - Auto
Channel 2 Phase 4 Pull-In........... - Auto

Write to PRE Delay (tWR)............ - Auto
Rank Write to Read (tWTR)........... - Auto
ACT to ACT Delay (tRRD)............. - Auto
Read to Write Delay (tRDWR)......... - Auto
Ranks Write to Write (tWRWR)........ - Auto
Ranks Read to Read (tRDRD).......... - Auto
Ranks Write to Read (tWRRD)......... - Auto
ALL PRE to Refresh.................. - Auto

>Voltage Settings:

CPU VID Special Add................. - + 550.0mV
DRAM Voltage Control................ - 2.243v
SB Core/CPU PLL Voltage............. - 1.55v
NB Core Voltage..................... - 1.3575v
CPU VTT Voltage..................... - 1.40v
VCore Droop Control................. - Disabled
Clockgen Voltage Control............ - 3.45v
CPU GTL0/2 REF Volt................. - 0.61x
CPU GTL 1/3 REF Volt................ - 0.61x
North Bridge GTL REF Volt........... - 0.58x
FSB Vref............................. - Auto

Genie BIOS Settings:

Exist Setup Shutdown................ - Mode 2
Exist Shutdown After AC loss........ - Enabled
O.C Clock Fail Retry Counter........ - 0
O.C Clock Fail CMOS Reloaded........ - Disabled
CPU Clock Ratio..................... - 10
Target CPU Clock.................... - 4900 MHz
CPU Clock........................... - 490
Boot Up Clock....................... - Auto
CPU Clock Amplitude................. - 800mV
CPU Clock0 Skew..................... - 200ps
CPU Clock1 Skew..................... - 0ps
DRAM Speed.......................... - 333/667
Target DRAM Speed................... - ??
PCIE Clock.......................... - 100mhz
CPU Spread Spectrum................. - Disabled
PCIE Spread Spectrum................ - Disabled